+18 Sale to minors is prohibited.
-15% off Cannabis Seeds 🚚 Discreet shipping 24/48h 🎁 Free gift on orders over 30€ 🌱 3,000+ products 🔥 Weekly flash deals -15% off Cannabis Seeds 🚚 Discreet shipping 24/48h 🎁 Free gift on orders over 30€ 🌱 3,000+ products 🔥 Weekly flash deals

POLLINATOR

Price range: 2.900,00 € through 3.800,00 €

The industrial Pollinator 2.0 is the benchmark dry sift resin extractor for large volumes. It has a rotating drum with a 150 µm mesh, adjustable speed from 30 to 40 rpm, a digital timer and overload protection. Choose the P3000 (3–4 kg per run) or the P5000 (5–7 kg per run).

- +
Guaranteed Safe Checkout
Discreet shipping 24/48h
Advice via WhatsApp
100% secure payment

Pollinator Industrial 2.0: dry sift resin extraction on a professional scale

When your harvest is measured in kilos, home pollinators can’t keep up. The industrial Pollinator version 2.0 is the benchmark machine for large-scale dry sift extraction: a rotating drum with a 150 µm mesh that mechanically separates trichomes from plant material, with no water, ice or solvents. It comes in two models, the P3000 and the P5000, depending on how much you need to process per run.

Pollinator, the Dutch brand behind the Ice-O-Lator, has been making extraction equipment for decades. Version 2.0 adds electronic speed control, soft start and stop, a digital timer and overload protection: more control, less supervision and a consistent result run after run.

P3000 or P5000: which model to choose

Pollinator P3000 Pollinator P5000
Capacity per run 3,000–4,000 g of dry material 5,000–7,000 g of dry material
Dimensions (container) 104 × 64 × 66 cm 120 × 80 × 80 cm
Overall dimensions (with motor box) 115 × 65 × 68 cm 130 × 82 × 84 cm
Weight 25 kg 48 kg
Digital timer Up to 5 hours of continuous running Up to 10 hours of continuous running
Best for Medium and large grows, associations Professional production and large volumes of trim

Both models share the same 150 µm mesh, the same 2.0 control system and the same operation. The difference is capacity: the P3000 is easier to handle and place; the P5000 processes almost twice as much per run and pays back its time faster when you work with a lot of material.

How it works

Dry, frozen material goes into the drum, which closes with a strong magnetic lid. As it turns, trichomes, made brittle by the cold, break away, pass through the 150 µm mesh and slowly fall to the bottom of the box, while leaves and plant debris stay in the drum. When you’re done, the resin is easy to collect from the bottom with a card.

What’s new in version 2.0

  • Adjustable speed from 30 to 40 rpm: tune the tumbling to the material and the purity you’re after.
  • Soft start and stop: the drum speeds up and slows down gradually, with no jolts.
  • Electronic overload protection: the drum keeps its pace whatever the weight; add more biomass and the motor delivers more power.
  • Stops in position: the drum automatically stops in the right position to be lifted out, emptied or loaded.
  • Digital timer: up to 5 hours on the P3000 and up to 10 hours on the P5000.

Step-by-step instructions

  1. Choose your material: use resinous sugar leaves and well-dried trim. Remove branches and stems, as they can damage the mesh.
  2. Freeze: put the material in airtight bags in the freezer for at least 2 hours, to keep moisture out and make the trichomes brittle.
  3. Load the drum: add the material without packing it, within your model’s capacity, and close the magnetic lid. The magnets are strong, so the lid takes some force to open.
  4. Start: place the drum in the box, close the cover, set the speed and timer, and press the start button.
  5. First collection: after 2–5 minutes, collect the first fraction: it’s the highest quality, with the largest trichome heads.
  6. Longer runs: let the machine run another 15–30 minutes to get the rest, keeping each fraction separate.

The golden rule: the shorter the run, the less you get but the purer it is; the longer the run, the more you get, with more plant debris. Indicative yield is 10–15% of the material’s weight, depending on how rich it is in trichomes.

Shared specifications

Brand Pollinator (Netherlands)
Version Industrial-grade 2.0
Type Electric rotating-drum dry sift resin extractor
Mesh 150 µm standard
Materials Food grade
Power 220 V
Speed Adjustable, 30–40 rpm
Indicative cycle 5 min (maximum purity) · 15–30 min (more yield)
Indicative yield 10–15% depending on material

Cleaning and care

After each session, take out the drum, empty the spent material and clean the mesh with isopropyl alcohol. Let everything dry completely before using it again: a clean, dry mesh is the key to good resin flow and to keeping the machine performing like new.

Need something smaller?

For home harvests, the adjustable-speed Secret Box 500 works on the same principle with up to 500 g per run, and the Top Zeef 6 L is the compact option that fits on a shelf. See every machine in dry resin extraction and press your resin with our hash presses.

FAQ

What’s the difference between the Pollinator P3000 and P5000?

They work the same way, with the same 150 µm mesh and the same 2.0 controls. The P3000 processes 3–4 kg per run, weighs 25 kg and its timer goes up to 5 hours; the P5000 processes 5–7 kg, weighs 48 kg and its timer goes up to 10 hours.

How long should I run it?

The first and purest fraction is collected after 2–5 minutes. To get the rest, allow another 15–30 minutes. The longer it runs, the more quantity and the less purity.

Does the material need freezing?

Yes, for at least 2 hours in airtight bags. Cold makes trichomes brittle, and the bag stops moisture clumping the resin or clogging the mesh.

What yield can I expect?

As a guide, 10–15% of the material’s weight, depending on its quality and how rich it is in trichomes.

Does it need water, ice or solvents?

No. It’s a fully mechanical extraction: cold, rotation and sieving.

Not sure which model suits you, or have a question about shipping a machine this size? Message us on WhatsApp at +34 679 453 912: a real person will answer, not a bot.

Product intended for extracting resin from plant material from your own garden. Sale to adults over 18 only. Please respect the laws in force in your country.

Weight 6 kg
Capacidad

, , ,

Reviews

There are no reviews yet.

Be the first to review “POLLINATOR”

Your email address will not be published. Required fields are marked *

Scroll to Top
Logo Themariashop
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.