Qnubu Autosift: the electric vibrating sifter that does the sifting for you
Sifting by hand is slow and tiring, and the result depends on how patient you feel that day. The Qnubu Autosift is an electric vibrating sifter that automates dry sift resin extraction: put the material on the mesh, close the lid, press the button, and the vibration moves the resin evenly through to the outlet, where you collect it in a container. It comes with two screens, 70 and 90 microns, and takes replacement screens from 40 to 180 µm.
How it works
A 50 W motor vibrates the screen at 1,150 movements per minute. Four shock-absorbing springs spread the vibration across the whole surface so the material moves and sifts evenly. The resin passes through the mesh, the plant matter stays on top and the sealed lid stops dust escaping. With no mechanical transmission, the Autosift is more efficient and much quieter.
Step-by-step instructions
- Prepare the material: use well-dried flowers or trim; a few hours in the freezer help the trichomes break away.
- Lay the anti-slip mat on a stable surface.
- Choose the screen: 70 µm for purer resin, 90 µm for a little more quantity.
- Load: fill the screen only a third full so the material can move with the vibration.
- Close: fit the lid and secure the clamps.
- Place a container at the outlet to collect the resin.
- Switch on and let the machine work. Collect the first fraction separately: it’s usually the cleanest.
Why choose the Autosift
- Automatic, even sifting: no hand shaking and a consistent result every session.
- Quiet and efficient: 50 W motor with no mechanical transmission.
- Stainless steel: rust- and corrosion-resistant, easy to clean.
- Sealed lid: no dust cloud, so your workspace stays clean.
- Two screens included (70 and 90 µm) and five mesh sizes available as replacements: Qnubu Autosift screens in 40, 70, 90, 120 and 180 µm.
Customise your Autosift with more microns
The included screens cover quality extraction. To go further, add the 40 µm for maximum purity or the 120 and 180 µm for more yield and to pre-filter large volumes. They swap in moments: see the micron guide on the Qnubu Autosift screen page.
Specifications
| Brand | Qnubu |
| Type | Electric vibrating sifter for dry sift extraction |
| Material | Stainless steel |
| Power | 50 W |
| Supply | AC 220 V, 50/60 Hz |
| Sifting frequency | 1,150 vibrations per minute |
| Damping | 4 shock-absorbing springs |
| Screens included | 70 µm and 90 µm |
| Recommended load | One third of the screen |
| Included | Anti-slip mat and cleaning brush |
Cleaning and care
After each session, remove the material, run the included brush over the mesh and clean the screen with isopropyl alcohol. Let it dry completely before using it again: a clean, dry screen lets resin through far better.
Vibration or drum?
The Autosift sifts by vibration over a flat mesh, ideal for controlling the micron and separating grades. If you prefer a rotating drum, see the Top Zeef 6 L, the Secret Box or, for large volumes, the Pollinator. Every option is in dry resin extraction, and to compact your resin, our hash presses.
FAQ
Which screens come with the Autosift?
It comes with two screens, 70 and 90 microns. You can add replacement screens in 40, 70, 90, 120 and 180 µm.
How much material per session?
Fill the screen a third full. Any more and the material won’t move properly with the vibration, and sifting loses efficiency.
Is it noisy?
No. With no mechanical transmission, its 50 W motor runs much more quietly than other systems.
How do I collect the resin?
The resin passes through the mesh and comes out of the bottom outlet, where you place a container before switching on.
Free shipping across Europe on orders over 100 €. Orders are packed within 48 hours and shipped in discreet, unbranded packaging.
Product intended for extracting resin from plant material from your own garden. Sale to adults over 18 only. Please respect the laws in force in your country.
Reviews
There are no reviews yet.