Secret Smoke bubble hash washing machine: ice water extraction without stirring by hand
Stirring a bucket of ice water by hand is the hardest part of ice water resin extraction. With this kit, the Secret Smoke bubble hash washing machine does that job for you: it agitates the material steadily to free the trichomes and, when you drain it, the 5 Secret Icer bags (190, 120, 70, 45 and 25 µm) split the resin into 4 grades of resin. It’s the system many shops call a Bubble Icer: cold, water and sieving, with no solvents.
What’s in the kit
- Secret Smoke washing machine with timer and drain hose.
- Secret Icer 5 bags: 190 µm (yellow) · 120 µm (red) · 70 µm (green) · 45 µm (blue) · 25 µm (black). More details on the Secret Icer 5 bags page.
- Zippered pyramid bag to put the material in the machine without it spreading.
- Suction-cup water thermometer to check the water is at about 4 °C.
Why use a washing machine
In ice water extraction, agitation is everything: it must free the trichomes without shredding the plant. By hand it’s hard to keep the pace for several minutes; the machine does it steadily on every cycle while the thermometer tells you when the water is ready. The result is a cleaner, more consistent and far less tiring extraction.
What else you need
- Dry, frozen plant material (trim and small buds).
- A bucket about 30 cm across for the bags.
- About 2 kg of small ice cubes.
- Paper towel and a metal sieve for drying.
Step-by-step instructions
- Set up the bucket: put the machine on a raised base and the bucket on the floor. Place the bags in the bucket from finest to coarsest (25 µm, 45 µm, 70 µm, 120 µm, 190 µm), one inside the other, label facing out.
- Chill the water: fill the machine halfway with cold water and small pieces of ice. Run it for 2 minutes to mix and check with the thermometer that the water is at about 4 °C; if not, add more ice.
- Load the material: fill the pyramid bag with up to 500 g of frozen material, zip it closed and put it in the machine.
- Set the cycle: close the lid and set the timer to 3–8 minutes. Short cycles give the cleanest resin; longer ones give more quantity with more plant matter.
- Drain the machine: when the timer reaches 0, take out the pyramid bag, wring it and drain all the water through the hose into the bucket with the bags.
- Collect the resin: lift out the first bag (190 µm), which should hold only plant residue. Then lift out the others one by one, shaking them to gather the resin at the bottom, and press out excess water with paper towel. Keep each grade separate.
- Dry the resin: push it through a metal sieve onto paper towel and spread it out. Leave it to dry for about 48 hours in the shade at room temperature. Incomplete drying can make it ferment.
- Repeat: go back to step 3 with the same material, even the same water to save ice. The second run still recovers plenty of resin.
Tips for a good result
- Cold is everything: water at about 4 °C and frozen material. Watch the thermometer and add ice between cycles if the temperature rises.
- Don’t overload: 500 g of material maximum in the pyramid bag.
- Use good material: big fan leaves hold little resin and dirty the extraction.
- Clean straight away: rinse the bags in cold water right after use so the resin doesn’t stick. If it does, clean them with alcohol. Clean the machine too so trichomes don’t stay on the walls.
Specifications
| Brand | Secret Smoke |
| Washing machine | Model XPB40-88, with timer and drain hose |
| Power | 250–300 W |
| Machine capacity | 2.1–4.5 kg (up to 500 g of material per cycle) |
| Machine dimensions | 52 × 37 × 36 cm |
| Bags | Secret Icer 5: 190 µm (yellow) · 120 µm (red) · 70 µm (green) · 45 µm (blue) · 25 µm (black) |
| Resin grades | 4 |
| Accessories | Zippered pyramid bag and suction-cup water thermometer |
Which kit to choose?
With 2 bags you get a single grade of resin, ideal for starting out. With 3 you separate two grades, and with 5 you reach four grades to fine-tune every extraction. Besides this one, see the kit with Secret Icer 2 bags and the kit with Secret Icer 3 bags. If you already have a machine, the Secret Icer bags are also sold separately.
More bags and accessories in ice resin extraction. For a method with no water, see dry resin extraction, and to compact the dried resin, our hash presses.
FAQ
How much material can go in the machine?
Up to 500 g of frozen material per cycle, inside the pyramid bag. The 2.1–4.5 kg capacity is the washing machine’s rating, not the recommended material load.
How long is each cycle?
3–8 minutes. You can repeat the cycle with the same material to recover the rest of the resin.
What is the thermometer for?
To check the water is at about 4 °C before you start and during extraction. If the water is too mild, trichomes don’t break away well. The suction cup holds it to the machine wall.
How long does the resin take to dry?
About 48 hours spread on paper towel, in the shade at room temperature. It must be completely dry before storage.
Free shipping across Europe on orders over 100 €. Orders are packed within 48 hours and shipped in discreet, unbranded packaging.
Product intended for extracting resin from plant material from your own garden. Sale to adults over 18 only. Please respect the laws in force in your country.


Reviews
There are no reviews yet.